When an Ariston water heater delivers only lukewarm or cold water, the cause is usually power, the thermostat or the heating element. Water heaters combine water and electricity, so only do the safe checks below.
Quick checks you can do safely
- Check the heater is switched on and the circuit breaker has not tripped.
- Check the thermostat is set to a sensible temperature.
- Allow time for heating; a large tank can take a while to reheat after heavy use.
- Look for leaks or damp around the unit and the pipes.
Common causes
- Thermostat fault: A faulty thermostat can stop the element from switching on, or shut it off too early.
- Failed heating element: Scale build-up on the element or electrical failure leaves the water cold even when the unit has power.
- Scale and sediment: Mineral deposits in tanks reduce heating performance and shorten the life of the element.
- Safety trip or power supply problem: A tripped safety cut-out or wiring fault can cut power to the heater.
When to call a technician
Do not open the electrical cover yourself. If the unit leaks, trips the breaker repeatedly or the pressure valve keeps dripping, switch it off at the isolator and book a technician.
Our technicians offer Ariston water heater repair at your home across Dubai, including Downtown Dubai, Dubai Marina, DAMAC Hills, Arabian Ranches and more. See all Dubai areas we cover or call 058 803 6705 to book.
Frequently asked questions
Why is my Ariston water heater not getting hot?
Usually a failed element, a thermostat fault or a tripped safety cut-out. A technician can test each one safely.
Is a leaking water heater dangerous?
It can be, because of the combination of water and electricity. Switch it off at the isolator and have it checked.
Do you repair water heaters in Dubai?
Yes, we repair Ariston water heaters on site.
